COMBI KINGModels: C & KPhone: (864) 963-3471
10Set-up Mode UIn the set-up function, it is possible to set the oven controller to match the mechanical set-up and the choice of
11U14 DemoYou activate or deactivate the demo mode by pressing the step key. 0= OFF, 1= ON.NOTE: If the demo mode is on (1= ON
12D2 Steam generator heatAvailable on K models only This function activates contactor K3. You activate or deactivate the function b
D15 Oven temperatureHere it is possible to read the current oven temperature, P1. In the field next to ”Temperature”, the current
conductivity, the lower the measured value.D22 Thermo-switch ovenHere it is possible to read the status of Q1 and Q1A. In the dis
Not activeNot activeNot activeNot activeNot activeTurn switchPress key for 5 seconds to access user menuDisplay shows settingDisplay s
B7 Current temperatureIn this function, you choose whether the oven should display the current temperature or thepreset temperature.Y
User Menu B14-B21B14 yearIn this function, you set the year.1. Press the key next to the temperature display (digit flashes).2. Tu
Turn switchStart/StopDisplay shows description of errorDisplay shows error “Er” NoMain SwitchERROR CODESNOTE: All keys can be used to
Error Codes2 DOOR OPEN Oven door open3 GENRA HOT Generator too hot4 OVEN HOT Oven too hot5 FAN HOT Fan too hot6 DRAIN > 75
ITEM PAGEApproval plate 3INSTALLATION AND CONNECTION 3Unpacking the Oven 3Installing the Oven 3Water connection 4Drain connection 5Elect
20ANNUAL SERVICE CHECKCustomer:__________________________________________________________________________Address:________________________________ C
APPENDIX NO 1BKI INSTALLATION CHECKLIST FOR COMBI KING OVENSTo be filled out at each installation of a BKI oven.In order for the
APPENDIX NO 2BKI INSTRUCTION CHECKLIST FOR VISUAL COMBI KING OVENSTo be filled out at each installation of a BKI oven.In order fo
Notes:23
24 WHAT IS COVERED This warranty covers defects in material and workmanship under normal use, and applies only to the original purc
3Approval PlateWhen communicating with BKI, we kindly ask you inform us of the serial number of the oven that is stated on the a
4WRONGCAUTION: The oven should be placed 2” (5 cm) from the rear wall and the distance between the right side of the oven and t
5Drain connectionFrom the factory, the BKI ovens are equipped with a drain system that removes surplus water from the oven chamber.
6ExhaustThe BKI ovens are equipped with an open/direct exhaust system that removes surplus humidity from the oven chamber. The exhau
88:8888888888888888888PRG½OPERATION PANEL - MODELS C & KTEMPERATURE SETTING. Press once and set temperature with TURN SWITCH. Enter
Setting of core temperature (optional extra):Press CORE TEMPERATURE key.If the display is off, the core temperature appears as 75°C.
9Main switchSteaming on C & K.Preheating on B.Exhaust open ifcontrol lamp on.Fan speed can be set between 20 and100%. Control l
Comments to this Manuals